Original VW, Audi, Skoda, and Seat outer joint for drive shaft on the wheel bearing sidewith original joint protective cover 5M0 501 151 Afor vehicles with all-wheel drive (4Motion or quattro)Scope of delivery:Outer joint 1K0 598 099 / 8V0 598 099 / 5Q0 598 099Joint protective cover 5M0 501 151 ANote:required accessories for installation:Lubricating grease G 052 738 A2Clamp N 107 153 01 + N 904 425 01

Original VW, Audi, Skoda, and Seat constant velocity joint for driveshaft on the gearbox sidewith original joint protection cover 1H0 407 283 Ffor vehicles with front-wheel drive and all-wheel drive (4Motion or quattro)Scope of delivery:Constant velocity joint 1K0 498 103 / 2Q0 498 104 / 2Q0 498 104 CJoint protection cover 1H0 407 283 FNote:required accessories for installation:grease G 052 738 A2clamp N 904 425 01lock ring 113 517 279

Ultrasonic PDC sensor original part number 1K0 919 275 / 3D0 998 275 Asuitable for various VAG vehiclessealing ring not included in deliveryOriginal part, not a replicaVarious colors available (can be painted over)schiefer metallicdunkelolivetannengrünindischrotnachtblaumalachitgrünmeteograubasaltschwarzScope of delivery:1 x Ultrasonic sensor 1K0919275 / 3D0998275A

AMPIRE Dual Dashcam DC2-PRO with high-resolution 2K (QUAD-HD) front camera, AHD rear camera and an integrated microphone for front and rear video recording with storage on an optionally available microSD card (32-128 GB). The dashcam is fully operated via a free smartphone app. An integrated GPS sensor enables position determination and speed detection. The 3D G-sensor integrated in the front camera detects accidents and automatically saves events on the microSD card. Via WLAN, you can view the recordings on your smartphone or tablet and export them for further processing. In addition, all settings can be made conveniently via the smartphone app.Visually, the matt black DC2-PRO dashcam is very compact and unobtrusive. An LCD display and unnecessary buttons were deliberately omitted. Installed behind the interior mirror, the front camera is hardly noticeable. The rear camera can be used to monitor the passenger compartment or rear traffic.Features143° wide-angle lens, diagonal (front)2844x1600 pixel 5MP resolution (front)30fps frame rate (front)Integrated GPS receiver for positioningIntegrated 3-axis G-Force sensor (adjustable)Integrated WLANfor control with smartphoneMini-USB 2.0 Hi-Speed interfacesStorage on optional microSD card (Class 10)Voltage stabilisation via super capacitorIntegrated microphone for sound recording (can be switched off)German/English voice messages (can be switched off)Parking mode (can be switched off)Scope of delivery1x front camera with integrated GPS receiver1x AHD rear camera1x ACC2 power supply unit with voltage monitoring and switch-off delay1x 8m connection cable to rear camera1x Operating instructions DEU/ENG1x CE Declaration of Conformity DEU/ENGTechnical data front dashcamViewing angle front camera: D:143°Image sensor front camera: SONY IMX335Resolution front camera: 2844x1600 pixels (5MP)Lens front camera: 6G-1R, F1.9Frame rate front camera: 30 FPSAspect ratio: 16:9 formatFront dimensions: 36 x 41 x 95 mm (W x H x L)Technical data rear dashcamImage sensor rear camera: AHD GC2053Resolution rear camera: 1920x1080 pixels (2MP)Frame rate rear camera: 25 FPSImage ratio: 16:9 formatDimensions rear camera: 36 x 37 x 63 mm (W x H x L)Technical data of the systemOperating temperature: -20° C ~ +70° CFlash memory: 8 MbytesPower consumption 610mA (boot time)Power consumption 470mA (Operation)Duration to start recording ~8 sec.Technical data power supply unitAdjustable switch-off voltage 11.6/11.9/12.2/12.5 volts (car) or 23.6/23.9/24.2/24.5 volts (truck)Adjustable switch-off time after: 1h, 2h, 4h, 6h, 12h, 24h and permanentOperating voltage 12 or 24 volts DCMax. Input current 2000mA@12 VDC, 1000mA@24VDCOutput connector MINI-USBOutput voltage 5 Volt, 2ADimensions 60 x 26 x 18mmStorage temperature -20°C to 85°C at 0-90% RHWorking temperature -10°C to 60°CFuse 2A/30VEfficiency 85%Smartphone AppThe following languages are supported by the AMPIRE DC2 app for this dashcam: English, Spanish, German, Chinese, Estonian, Greek, Latvian, Polish, Russian, Slovak, Czech, Ukrainian.PC AppTo view the downloaded videos on a PC, we recommend the free VLC video player. Some Windows video players do not output sound.https://www.vlc.de/Note on the fixed-mounted power supply unitThe fixed-mount power supply unit (article no. ACC2) for the DC2-PRO dashcam enables the so-called parking space mode. When parking mode is activated, the dashcam remains switched on and "guards" your vehicle even when the ignition is switched off. To avoid draining the starter battery, the ACC2 automatically switches off the dashcam at an adjustable voltage or after an adjustable time. The final switch-off takes place 5 minutes after the undervoltage has been reached.Legal noticeWhat is allowed and what is not:https://www.adac.de/verkehr/recht/verkehrsvorschriften-deutschland/dashcam/Important note on installationThe GPS antenna integrated in the dashcam requires free reception to the GPS satellites in order to be able to calculate a position or speed. Windscreens with insulating glass have an infrared-reflecting metallic coating. In such vehicles, position the dashcam in the communication window provided for this purpose in most vehicles, which allows GPS reception. You will find more detailed information on this in the car's operating instructions.

With this service ticket you get exclusive KUFATEC support even if you have not purchased an item from us.We support you with every kind of retrofitting which is technically feasible and also offered by us.We guarantee immediate availability or contact in the time of Monday - Thursday 8 - 15 o'clock as well as Friday 8 - 12 o'clock.You can purchase the service ticket with different scopes (bronze, silver, gold, platinum)Bronze scope of service:Help with connectionHelp with choosing the right partsActivation of control units (SFD1) **Service scope silver:same scope as bronzeHelp via Team Viewer *Service scope gold:same scope as silverProvision of available installation instructions / connection instructionsService scope platinum:same scope as goldHelp with software configuration / commissioning of retrofits / control parts **Selectable options:Version 1, bronzeVersion 2, silverVersion 3, goldVersion 4, platinumScope of delivery:Support for retrofits via phone, email, and remoteNote:* Diagnostic system must be present** Any KUFATEC coding dongle must be availablefor functions where KUFATEC offers a dongle, this must be purchased additionallythe support ticket is limited to one chassis number and one retrofit

Plug&Play smartphone interface with full integration into the car's multimedia system. Check the compatibility list to see if we have a solution available for your car.The image is displayed on the full factory monitor and the sound is fed in via the audio AUX input of your factory multimedia system. Before ordering, check whether your factory multimedia system also has an audio AUX input or can be retrofitted.Our smartphone interface is compatible with Apple CarPlay® and Android Auto, making it a smarter and safer way to use your smartphone in the car. Everything is operated via the vehicle's own buttons and control systems. Of course, you can also use Siri and OK Google voice control via the included microphone. Everything you want to do with your smartphone while driving can be done directly from the car's display with Apple CarPlay® and Android Auto. You can easily get directions, send and receive messages. While navigating, you can listen to your favourite music via Spotify or your favourite radio station via a radio app - and still concentrate on the road.Simply connect your smartphone to the USB socket in our systemEven more conveniently, you can connect your Apple iPhone wirelessly via WiFi. Wireless Apple CarPlay® is possible from the Apple iPhone 5.FEATURESInterface for retrofitting Apple CarPlay® and for Android AutoOperation via OEM buttons/touchpad from vehicleWireless Apple CarPlay® via supplied WIFI antenna from iPhone 5 onwardsWired Apple CarPlay® via USB (switch off WLAN on iPhone)Wired Android Android via USBAndroid Mirrorlink function (mirroring the smartphone display)USB input for multimedia playback (e.g. USB stick)Video playback with Apple iOS only via USB cableUp to 1080p HD resolution for multimedia playbackSupports RMVB, MOV, MKV, MP4, AVI, RMPairing via Bluetooth only necessary during initial installationIntegrated audio DSP with equaliser for audio outputAnaloger Audio-Ausgang mit 3 Volt Ausgangsspannung für die Tonwiedergabe (Audio AUX)Supports left- and right-hand drive vehiclesSoftware update possible via micro USB input (adapter included)"Apple Siri" and "OK Google" voice control via supplied microphone (no telephony) APPSGPS navigation with Google Maps, Waze and Apple Maps, etc.Music playback with Spotify, Apple Music, Amazon Prime, etc.CAMERA FUNCTIONSInput for front camera (composite video)Rear camera input (composite video)Support for rear cross traffic alert (PDC)Supports moving guidance linesSupports 360° camera systems12 volt output for front camera power supply12 volt output for rear camera power supplyACCESSORIESWe will send you an adapter from MICRO-USB to USB for possible software updates from the interface.VEHICLE COMPATIBILITYBefore purchasing and installing the product, check that it is compatible with your car type, year of manufacture and entertainment system. Your entertainment system must have an audio AUX input for sound playback. Incompatibility may result in damage.Suitable for the following vehicles:Seat Altea/Altea XL with OEM Radio: RNS 510, 03/2004 - 06/2015Seat Leon 1P with OEM Radio: RNS 510, 07/2005 -10/2012Seat Toledo 5P with OEM Radio: RNS 510, 02/2004 - 05/2009Skoda Fabia II with OEM Radio: RNS 510/Columbus, 03/2007 - 06/2014Skoda Octavia 1Z with OEM Radio:  RNS 510/Columbus, 01/2009 - 12/2012Skoda Rapid with OEM Radio:  RNS 510 / Columbus, 10/2012 -02/2019Skoda Roomster with OEM Radio:  RNS 510 / Columbus, 05/2006 - 04/2015Skoda Superb 3T with OEM Radio: RNS 510 / Columbus, 06/2008 - 06/2015Skoda Yeti 5L with OEM Radio: RNS 510 / Columbus, 08/2009 - 07/2017VW Golf 6 with OEM Radio: RNS 510, 10/2008 - 10/2012VW Passat B7 with OEM Radio: RNS 510, 10/2010 - 02/2015VW Phaeton (GP3 / GP4) with OEM Radio: RNS 810, 04/2010 - 03/2016VW Scirocco 137 with OEM Radio: RNS 510, 08/2008 - 03/2014VW T5 7E with OEM Radio: RNS 510, 10/2009 - 07/2015VW Touran 1T3 with OEM Radio: RNS 510, 08/2010 - 04/2015SMARTPHONE COMPATIBILITYBefore purchasing and installing, check that the product is compatible with your smartphone.Apple iOS: iPhone 5 and higherGoogle Android: Android 5.0 (Lillipop) better Android 6.0 (Marshmallow) and higher.TECHNICAL DATACharging current of the USB port: 1100mAInterface dimensions Interface: 166x89x27mmAPPROVALSE-type of approval number E57*10R06/00*0081E-type of approval number E57*COP*0279IMPORTANT PRODUCT INFORMATIONThe MEDIA IN socket on the body is not an HDMI input for playback from external HDMI sources. This socket is required for add-on modules on some vehicle types. This product is button controlled only and does not support touch screen or gesture control.This retrofit does not serve as a hands-free deviceINSTALLATIONS NOTEThis product is used in vehicles with 12V battery. Please do not install in vehicles with any other voltage. Never extend the HSD signal wires. This product is made of high precision parts and should not be subjected to strong impact. Never open the housing. To protect driving safety and avoid traffic law violations, never operate the product while driving. The optional reversing cameras are only visible when manoeuvring. In addition, always pay attention to your surroundings and never rely on the camera alone. All installation steps should only be carried out by a trained professional. During installation, the ignition must be switched off and the product must not be connected to power until the wiring is complete. NEVER plug or unplug the cables while the power is on to avoid damaging the monitor or the product. Route the cables so that they do not come into contact with metal edges. Doing so may damage the wiring, resulting in fire. Avoid any contact with hot surfaces when wiring the main unit. High temperatures can damage the wiring and cause short circuits, arcing and fires. Please DO NOT install the product in a humid environment to avoid electric shock, damage and fire caused by a short circuit. Upon receipt of the product, please check that all components are in the packaging. If anything is missing, inform the supplier / manufacturer. Start the engine before loading, check the interface if the function is displayed, check the key if the vehicle interface is working correctly. Please give the feedback to the supplier / manufacturer if you have any questions. Please make sure that you handle the disassembled vehicle parts carefully during installation and avoid scratches on the instrument panel. Unused connectors must be insulated to avoid a short circuit. The cable connections should be well plugged in. Avoid interference with control components such as the steering wheel, accelerator and brake pedals.LEGAL NOTICEApple and the Apple logo are trademarks of Apple Inc. registered in the U.S. and other countries. Android is a trademark of Google LLC. The Bluetooth® word mark and logos are registered trademarks and are owned by Bluetooth SIG, Inc. Third party products and brand names may be registered trademarks of their respective owners.

Specific halogen adapter for converting from xenon to halogen headlights for Seat Altea 5PHigh-quality adaptation in OEM qualityOnly one set is required to connect both headlightsSelectable option:Up to model year 2009From model year 2010Scope of delivery:Xenon to Halogen-Adapter Plug & PlayNote:For the commissioning of the manual headlight range control (mLWR) the cable set for the extension is still required.

Specific cable set for expanding the manual headlight range control for Seat Altea 5PHigh-quality adaptation in OEM qualityScope of delivery:CablesetNote:Another adapter for the headlights is required to convert from xenon to halogen.

Specific Xenon adapter in order to upgrade from Halogen headlights to Xenon headlights HID for Seat Altea 5POnly one Set is needed for both head lightsHigh quality harnesses are constructed from OEM componentsScope of delivery:Xenon adapterNote:These adapters will be delivered without auto-levelingPlease keep in mind that in some countries it is forbidden by law to use HID-lights without auto-leveling

Retrofit kit for converting from halogen to LED trunk lightingSuitable for the following vehicles: VW PhaetonVW Sharan 7MVW Sharan 7NVW T5 7HAudi A1 8XAudi A2 8ZAudi A3 8PAudi A3 8VAudi A4 8EAudi A4 8KAudi A5 8TAudi A6 4GAudi A7 4GAudi A8 4HAudi TT 8JAudi TT 8S RoadsterAudi Q2 GAAudi Q3 8UAudi Q5 8RAudi R8 (before facelift models until model year 2010)Skoda Octavia 5ESkoda Kodiaq NS7Skoda Yeti 5LSeat Alhambra 7MSeat Alhambra 7NSeat Altea 5PSeat CordobaSeat Exeo 3RSeat Ibiza 6PSeat Ibiza KJSeat Leon 1PSeat Leon 5FSeat Toledo 1M High quality adaptation in original equipment manufacturer qualityScope of Delivery:1 x original Audi LED light1 x Plug & Play adapterNote:After installation no coding is requiredFor existing luminaire 6L0947415 / 7L0947415 / 1KD947101 / 7L6947101A use article 40569

Universal AMPIRE Bluetooth receiver for vehicles that have a 3.5 mm jack and USB jack as an AUX inputJust plug in both plugs and go - Plug & PlayPower supply via USB and music playback via the cableThe Bluetooth receiver can be installed out of sight because it has no controls or buttons that need to be operatedAll settings such as volume, music selection, and play / pause are performed on your device (e.g. mobile phone)Details:Splash-proof, marine certifiedAutomatic activationQDL licensed Bluetooth 4.0 CRS I9chipA2DP in the highest EDR specification - BT audio streaming also uncompressed files like Wave, Flac, Lossless, MP3 etc.3.5 mm jack plug with signal output 1.0 VSSID Display Name: BTR300Connections:USB input (5 VDC power supply)3.5 mm jack outputTechnical specifications:Voltage: 5 volts DCCurrent consumption: 40 mA max.Bluetooth 4.0Frequency range: 20 Hz-20 kHzOutput voltage: 1 V RMSCable length: 300 mmScope of delivery:Plug & Play Bluetooth receiverNote:Several devices can be connected to the BTR300, but only one device can stream musicThe BTR300 always remembers the most recently remodeled device and connects itself automatically after switching onA connection to another device must be performed manuallyIf the connected device is out of range for more than a minute, the connection is automatically interrupted and the BTR300 goes into pairing mode [the LED (6) flashes]BLUETOOTH APPROVAL - Declaration ID D025151 Referenced Qualified Design ID 56386 - Listing Date 08 December 2014If your vehicle does not have a USB interface, you can realize this with our USB charging adapter for the cigarette lighter article no. 38097

This universal A2DP Bluetooth receiver was developed for vehicles with Cinch sockets and 12 Volt electrical system as AUX input The AMPIRE BTR100 Bluetooth receiver offers the possibility to play music from the mobile phone via the AUX connectorThe housing is weatherproofed, splashproofed (marine certified) and very stableAutomatic switch on by ignition onAutomatic Remote OutputTechnical specifications:Voltage: 12 V DCCurrent consumption: 40 mA max.Bluetooth 4.0 CRS I9chipFrequency range: 20 Hz-20 kHzRCA connectors (red, white) with signal output 1.0 VDimensions 65 x 50 x 19 mmScope of delivery:AMPIRE BTR 100 Bluetooth ReceiverNote:The vehicle must have an AUX or multimedia interface (for example MDI, AMI)You can connect multiple devices with the BTR 100, but only one device can stream musicThe BTR 100 connects automatically to the last stored device. A connection to another device has to be done manuallyThe BTR100 can be installed out of visibility, because it has no button or controller, which need to be activated or something else

Original Volkswagen, Audi, Skoda and Seat rear right drive shaftwith constant velocity jointsfor vehicles wheel drive (4Motion / quattro)Scope of delivery:Drive shaft rear right  1K0 501 204 D (1K0501204D)

Original Volkswagen, Audi, Skoda and Seat rear left drive shaftwith constant velocity jointsfor vehicles  wheel drive (4Motion / quattro)Scope of delivery:Drive shaft rear left 1K0 501 203 D (1K0501203D)

Wiring harness for connection to the original VW / Audi heater-remote-control to the Webasto auxiliary heaterSuitable for: VolkswagenAudiSkodaSeatCompatible with Webasto recipient:1K09635131K0963513A4F09095094F0909509A4F0909509B7N09635137N0963513AScope of supply:Wiring harnessDipole antennaNote:For vehicles with auxiliary heater, check whether it can be upgraded to a parking heater

Retrofit-Kit SEAT MEDIA-IN in order to connect an external audio source (mp3 - Player as well as USB-storage) to vehicles equipped with the following radio- navigation units: Media System 2.1Note: For Altea (5P), Leon (1P) only from 2011 model yearNot suitable for vehicles with factory fitted CD-ChangerThe factory fitted AUX-IN connector get lost - mp3 player with jack connection needs to be connected to the media-in interface Device control (depends on device) as well as display of music title and playlist through factory fitted radio- navigation unitScope of delivery:MEDIA-IN Interface inkl. coverWiring Plug & PlayAdapter for USB connectionNotes:The mounting place depends on the vehicle - in some cases additional spare parts will be needed (glove box, arm rest)

Music Interface to input audio signals to factory Volkswagen / Audi / Seat / Skoda head unitsTruly remarkable sound clarity by using the original CD-Changer connectionEasy installation with factory-correct wiringSuitable for head units with a Mini-ISO connection on the back, for example: Audi Navi Plus, Chorus 2, Concert 1, Concert 2, Symphony 1, Symphony 2VW Beetle Alpha, Beetle Gamma, Beetle Gamma CD, Beta 5, Gamma 4, Gamma 5Skoda MS 501, MS502, Navigation 4:3, SatCompass, Symphony CD, Symphony CartridgeSeat Alana, Aura, Aura CD, Elba, Highline, Lena, Liceo, Scala, Soundsystem 2Features:Optional connections: iPod / iPhoneAUX InputCharging iPod / iPhoneTrackview 1-99Controlled through your head unitDimensions interface in cm: 7,8 x 6,4 x 2,5Scope of delivery:Music InterfaceWiring (Length 900 mm)Notes:No control by using the AUX-IN (jack) inputThe factory fitted CD changer gets lostIn some cases you are not able to split the Mini-ISO connection. In that case you will also need Part No. 33687. Please indicate this before placing an order

Complete set for the retrofit of xenon headlights with cornering light function in connection including auto-leveling headlamp control for Seat Altea 5PSelectable options:4MotionFront wheel driveScope of delivery:Wiring   Xenon - AdapterControl unit Mounting plate, sensorNotes:After installation is done the sensors must be recoded via diagnosisIn most countries the leveling system is required by law in combination with Xenon lightsNot suitable for retrofitting Xenon Headlights without cornering light function.

Specific set of cables for retrofitting original fog lightsSuitable for the following VW vehicles:Golf 6 (GTI, GTD needs 38369)Touran (From 2011 model year)Caddy 2KScirocco 1KEOS (from 2010 model year)Suitable for the following Skoda vehicles:Skoda Octavia 1Z from model year 2009Suitable for the following Seat vehicles:Alhambra 7NAltea 5P from model year 2010Leon 1P from model year 2010The following parts will be needed in addition:Fog light left, rightVentilation grid left, rightLight switch with fog light functionSuitable for fog lights with HB4 socketNote: Please check whether the BCM onboard control unit (3 x 52-pole connector) is fitted with terminals on the following position:Connector C (Beige) - PIN 25Connector A (Black) - PIN 25In case of no available terminals the BCM needs to be replacedScope of delivery:Set of cablesNote:Vehicle requires coding after installationIn order