Plug & Play smartphone interface with full integration into the car's multimedia system. Check the compatibility list to see if we have a solution available for your car.The image display is shown on the entire factory monitor, and the sound is fed through the audio AUX input of your factory multimedia system. Before ordering, make sure your factory multimedia system has an audio AUX input or can be retrofitted.Our smartphone interface is compatible with Apple CarPlay® and Android Auto, providing an intelligent and safer way to use your smartphone in the car. Everything is controlled through the vehicle's buttons and controls. You can also use Siri and OK Google voice control with the included microphone. With Apple CarPlay® and Android Auto, you can easily access directions, send and receive messages, listen to your favorite music on Spotify, or tune in to your favorite radio station - all while focusing on the road.Simply connect your smartphone to the USB port in our system and you're ready to go.For even more convenience, you can wirelessly connect your Apple iPhone via WiFi. Wireless Apple CarPlay® is possible from the Apple iPhone 5 onwards.FEATURESInterface for retrofitting Apple CarPlayOperation via OEM buttons/touchpad of the vehicleWireless Apple CarPlayWired Apple CarPlayWired Android AutoAndroid Mirrorlink function (mirroring the smartphone display)USB input for multimedia playback (e.g., USB stick)Video playback on Apple iOS only via a USB cableUp to 1080p HD resolution for multimedia playbackSupports RMVB, MOV, MKV, MP4, AVI, RMPairing via Bluetooth only necessary during initial installationIntegrated audio DSP with equalizer for audio outputAnalog audio output with 3-volt output voltage for audio playback (Audio AUX)Supports vehicles with left-hand and right-hand driveSoftware update possible via a micro-USB input (adapter included)Apple Siri and OK Google voice control via included microphone (no telephony)APPSGPS navigation with Google Maps, Waze, Apple Maps, and moreMusic playback with Spotify, Apple Music, Amazon Prime, and moreCAMERA FUNCTIONSInput for front camera (composite video)Input for rearview camera (composite video)Support for parking distance control (PDC)Support for moving guide linesSupports 360° camera systems12-volt output for front camera power supply12-volt output for rear camera power supplyACCESSORIESIncludes an adapter from AUX to USB for audio input and a MICRO-USB to USB adapter for possible software updates for the interface.VEHICLE COMPATIBILITYThis interface is not compatible with vehicles equipped with option 06VA (CIC control). Before purchasing and installing, check if the product is compatible with your car type, year, and entertainment system. Incompatibility can lead to damage.Your entertainment system must have an audio AUX input for audio playback.Compatible with the following vehicles:BMW 1 Series F20/21with NBT-EVO ID4: 03/2015 - 06/2016with NBT-EVO ID5/6: 07/2016 - *BMW 2 Series F22with NBT-EVO ID4: 03/2015 - 06/2016with NBT-EVO ID5/6: 07/2016 - *BMW 2 Series F23with NBT-EVO ID4: 11/2014 - 06/2016BMW 3 Series F30/31/34/80with NBT-EVO ID4: 07/2015 - 06/2016with NBT-EVO ID5/6: 07/2016 - 08/2018*BMW 4 Series F32/33/36with NBT-EVO ID4: 07/2015 - 06/2016with NBT-EVO ID5/6: 07/2016 - *BMW 5 Series G30/31/38with NBT-EVO ID5/6: 10/2016 - *BMW 6 Series F06/12/13with NBT-EVO ID4: 03/2013 - 06/2016with NBT-EVO ID5/6: 07/2016 - *BMW 6 Series G32with NBT-EVO ID5/6: 07/2017 - *BMW 7 Series G11/12/13with NBT-EVO ID4: 07/2015 - 06/2016with NBT-EVO ID5/6: 07/2016 - *BMW X1 F48with NBT-EVO ID4: 07/2015 - 08/2017with NBT-EVO ID5/6: 08/2017 - *BMW X3 F25with NBT-EVO ID4: 03/2016 - 06/2016with NBT-EVO ID5/6: 07/2016 - *BMW X3 G01with NBT-EVO ID5/6: 11/2017 - *BMW X4 F26with NBT-EVO ID4: 03/2016 - 06/2016with NBT-EVO ID5/6: 07/2016 - *BMW X5 F15/85with NBT-EVO ID5/6: 07/2016 - *BMW X6 F16/86with NBT-EVO ID5/6: 07/2016 - *SMARTPHONE COMPATIBILITYCheck if the product is compatible with your smartphone before purchasing and installing.Apple iOS: iPhone 5 and newerGoogle Android: Android 5.0 (Lollipop) or better Android 6.0 (Marshmallow) and newer.TECHNICAL DATAUSB port charging current: 1100mAInterface dimensions: 166x89x27mmPackaging dimensions: 260x220x80mmAPPROVALSE-mark number E57*10R06/00*0081E-mark number E57*COP*0279IMPORTANT PRODUCT NOTEThe MEDIA IN socket on the housing is not an HDMI input for playing external HDMI sources. This socket is required for additional modules in some vehicle types. This product is controlled only by buttons and does not support touchscreen or gesture control.* Additional item number 46859 is required.This retrofit is not intended as a hands-free system.INSTALLATION NOTEThis product is designed for use in vehicles with a 12V battery. Do not install it in vehicles with a different voltage. Never extend the HSD signal lines. This product consists of highly precise parts and should not be subjected to strong impacts. Never open the housing. To protect driving safety and avoid traffic violations, never operate the product while driving. The optional rearview cameras are only visible when reversing. Always pay attention to your surroundings and never rely solely on the camera. All installation steps should be carried out by a trained professional. During installation, the ignition must be turned off, and the product should only be connected to power after complete wiring. NEVER plug or unplug the cables while the device is powered on to avoid damaging the monitor or the product. Route the cables so they do not come into contact with metal edges, as this can damage the wiring and lead to fires. Avoid any contact with hot surfaces when wiring the main unit. High temperatures can damage the wiring and cause short circuits, arcs, and fires. Please do NOT install the product in a damp environment to avoid electric shocks, damage, and fires caused by a short circuit. Upon receiving the product, check if all components are in the packaging. If anything is missing, inform the supplier/manufacturer. Start the engine before loading, check the interface to see if the function is displayed, check the key to ensure the vehicle interface works correctly. Please provide feedback to the supplier/manufacturer if you have any questions. Please be careful when handling disassembled vehicle parts during installation and avoid scratching the dashboard. Unused connector plugs must be insulated to prevent short circuits. Cable connections should be securely plugged in. Avoid interfering with control components such as the steering wheel, gas pedal, and brake pedal.LEGAL NOTICEApple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. Android is a trademark of Google LLC. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. Third-party product and brand names may be trademarks of their respective owners. 

Universal AMPIRE Bluetooth receiver for vehicles that have a 3.5 mm jack and USB jack as an AUX inputJust plug in both plugs and go - Plug & PlayPower supply via USB and music playback via the cableThe Bluetooth receiver can be installed out of sight because it has no controls or buttons that need to be operatedAll settings such as volume, music selection, and play / pause are performed on your device (e.g. mobile phone)Details:Splash-proof, marine certifiedAutomatic activationQDL licensed Bluetooth 4.0 CRS I9chipA2DP in the highest EDR specification - BT audio streaming also uncompressed files like Wave, Flac, Lossless, MP3 etc.3.5 mm jack plug with signal output 1.0 VSSID Display Name: BTR300Connections:USB input (5 VDC power supply)3.5 mm jack outputTechnical specifications:Voltage: 5 volts DCCurrent consumption: 40 mA max.Bluetooth 4.0Frequency range: 20 Hz-20 kHzOutput voltage: 1 V RMSCable length: 300 mmScope of delivery:Plug & Play Bluetooth receiverNote:Several devices can be connected to the BTR300, but only one device can stream musicThe BTR300 always remembers the most recently remodeled device and connects itself automatically after switching onA connection to another device must be performed manuallyIf the connected device is out of range for more than a minute, the connection is automatically interrupted and the BTR300 goes into pairing mode [the LED (6) flashes]BLUETOOTH APPROVAL - Declaration ID D025151 Referenced Qualified Design ID 56386 - Listing Date 08 December 2014If your vehicle does not have a USB interface, you can realize this with our USB charging adapter for the cigarette lighter article no. 38097

This universal A2DP Bluetooth receiver was developed for vehicles with Cinch sockets and 12 Volt electrical system as AUX input The AMPIRE BTR100 Bluetooth receiver offers the possibility to play music from the mobile phone via the AUX connectorThe housing is weatherproofed, splashproofed (marine certified) and very stableAutomatic switch on by ignition onAutomatic Remote OutputTechnical specifications:Voltage: 12 V DCCurrent consumption: 40 mA max.Bluetooth 4.0 CRS I9chipFrequency range: 20 Hz-20 kHzRCA connectors (red, white) with signal output 1.0 VDimensions 65 x 50 x 19 mmScope of delivery:AMPIRE BTR 100 Bluetooth ReceiverNote:The vehicle must have an AUX or multimedia interface (for example MDI, AMI)You can connect multiple devices with the BTR 100, but only one device can stream musicThe BTR 100 connects automatically to the last stored device. A connection to another device has to be done manuallyThe BTR100 can be installed out of visibility, because it has no button or controller, which need to be activated or something else

specific module to use the following equipment while drivingvideo sourceTV tunerDVD playerUSBScreen Mirroring (if supported from factory)OBD-Version - no interface needs to be fitted into the vehicleSoftwareupdate with the free KUFATEC Dongle Toolcoding will be automatically completed once you plug it into the OBD-diagnosissuitable for the following BMW vehicles:1er - F20, F212er - F22, F23, F45, F46, F873er - F30, F31, F34, F80, G20, G21, G284er - F32, F33, F36, F82, F835er - F07, F10, F11, F18, G30, G316er - F06, F12, F137er - F01, F02, F03, F04, G11, G128er - G14, G15X1 - F48, F49X2 - F39X3 - F25, G01, G08X4 - F26, G02X5 - F15, F85, F95, G05X6 - F16, F86, G06X7 - G07Z4 - G29Mini - F55, F56Rolls Royce Ghostsuitable for the following systems:CIC ProfessionalNBT ProfessionalNBT Touch ProfessionalNBT EVO ID 4, ID 5, ID 6 ProfessionalNBT MGU ID7 Professional (SW 1.24 or higher required)the interface can only be used at one vehiclealways re-usable on the same vehicle (enable / disable)Scope of delivery:interfaceNote:Dongle must be updated to 1.26 prior usage on ID7 with Update 2021not for E-series vehicles