AMPIRE Dual Dashcam DC2-PRO with high-resolution 2K (QUAD-HD) front camera, AHD rear camera and an integrated microphone for front and rear video recording with storage on an optionally available microSD card (32-128 GB). The dashcam is fully operated via a free smartphone app. An integrated GPS sensor enables position determination and speed detection. The 3D G-sensor integrated in the front camera detects accidents and automatically saves events on the microSD card. Via WLAN, you can view the recordings on your smartphone or tablet and export them for further processing. In addition, all settings can be made conveniently via the smartphone app.Visually, the matt black DC2-PRO dashcam is very compact and unobtrusive. An LCD display and unnecessary buttons were deliberately omitted. Installed behind the interior mirror, the front camera is hardly noticeable. The rear camera can be used to monitor the passenger compartment or rear traffic.Features143° wide-angle lens, diagonal (front)2844x1600 pixel 5MP resolution (front)30fps frame rate (front)Integrated GPS receiver for positioningIntegrated 3-axis G-Force sensor (adjustable)Integrated WLANfor control with smartphoneMini-USB 2.0 Hi-Speed interfacesStorage on optional microSD card (Class 10)Voltage stabilisation via super capacitorIntegrated microphone for sound recording (can be switched off)German/English voice messages (can be switched off)Parking mode (can be switched off)Scope of delivery1x front camera with integrated GPS receiver1x AHD rear camera1x ACC2 power supply unit with voltage monitoring and switch-off delay1x 8m connection cable to rear camera1x Operating instructions DEU/ENG1x CE Declaration of Conformity DEU/ENGTechnical data front dashcamViewing angle front camera: D:143°Image sensor front camera: SONY IMX335Resolution front camera: 2844x1600 pixels (5MP)Lens front camera: 6G-1R, F1.9Frame rate front camera: 30 FPSAspect ratio: 16:9 formatFront dimensions: 36 x 41 x 95 mm (W x H x L)Technical data rear dashcamImage sensor rear camera: AHD GC2053Resolution rear camera: 1920x1080 pixels (2MP)Frame rate rear camera: 25 FPSImage ratio: 16:9 formatDimensions rear camera: 36 x 37 x 63 mm (W x H x L)Technical data of the systemOperating temperature: -20° C ~ +70° CFlash memory: 8 MbytesPower consumption 610mA (boot time)Power consumption 470mA (Operation)Duration to start recording ~8 sec.Technical data power supply unitAdjustable switch-off voltage 11.6/11.9/12.2/12.5 volts (car) or 23.6/23.9/24.2/24.5 volts (truck)Adjustable switch-off time after: 1h, 2h, 4h, 6h, 12h, 24h and permanentOperating voltage 12 or 24 volts DCMax. Input current 2000mA@12 VDC, 1000mA@24VDCOutput connector MINI-USBOutput voltage 5 Volt, 2ADimensions 60 x 26 x 18mmStorage temperature -20°C to 85°C at 0-90% RHWorking temperature -10°C to 60°CFuse 2A/30VEfficiency 85%Smartphone AppThe following languages are supported by the AMPIRE DC2 app for this dashcam: English, Spanish, German, Chinese, Estonian, Greek, Latvian, Polish, Russian, Slovak, Czech, Ukrainian.PC AppTo view the downloaded videos on a PC, we recommend the free VLC video player. Some Windows video players do not output sound.https://www.vlc.de/Note on the fixed-mounted power supply unitThe fixed-mount power supply unit (article no. ACC2) for the DC2-PRO dashcam enables the so-called parking space mode. When parking mode is activated, the dashcam remains switched on and "guards" your vehicle even when the ignition is switched off. To avoid draining the starter battery, the ACC2 automatically switches off the dashcam at an adjustable voltage or after an adjustable time. The final switch-off takes place 5 minutes after the undervoltage has been reached.Legal noticeWhat is allowed and what is not:https://www.adac.de/verkehr/recht/verkehrsvorschriften-deutschland/dashcam/Important note on installationThe GPS antenna integrated in the dashcam requires free reception to the GPS satellites in order to be able to calculate a position or speed. Windscreens with insulating glass have an infrared-reflecting metallic coating. In such vehicles, position the dashcam in the communication window provided for this purpose in most vehicles, which allows GPS reception. You will find more detailed information on this in the car's operating instructions.

AMPIRE Dual Dashcam DC2-PRO with high-resolution 2K (QUAD-HD) front camera, AHD rear camera and an integrated microphone for front and rear video recording with storage on an optionally available microSD card (32-128 GB). The dashcam is fully operated via a free smartphone app. An integrated GPS sensor enables position determination and speed detection. The 3D G-sensor integrated in the front camera detects accidents and automatically saves events on the microSD card. Via WLAN, you can view the recordings on your smartphone or tablet and export them for further processing. In addition, all settings can be made conveniently via the smartphone app.Visually, the matt black DC2-PRO dashcam is very compact and unobtrusive. An LCD display and unnecessary buttons were deliberately omitted. Installed behind the interior mirror, the front camera is hardly noticeable. The rear camera can be used to monitor the passenger compartment or rear traffic.Features143° wide-angle lens, diagonal (front)2844x1600 pixel 5MP resolution (front)30fps frame rate (front)Integrated GPS receiver for positioningIntegrated 3-axis G-Force sensor (adjustable)Integrated WLAN for control with smartphoneMini-USB 2.0 Hi-Speed interfacesStorage on optional microSD card (Class 10)Voltage stabilisation via super capacitorIntegrated microphone for sound recording (can be switched off)German/English voice messages (can be switched off)Parking mode (can be switched off)Scope of delivery1x front camera with integrated GPS receiver1x AHD rear camera1x ACC2 power supply unit with voltage monitoring and switch-off delay1x 8m connection cable to rear camera1x Operating instructions DEU/ENG1x CE Declaration of Conformity DEU/ENGTechnical data front dashcamViewing angle front camera: D:143°Image sensor front camera: SONY IMX335Resolution front camera: 2844x1600 pixels (5MP)Lens front camera: 6G-1R, F1.9Frame rate front camera: 30 FPSAspect ratio: 16:9 formatFront dimensions: 36 x 41 x 95 mm (W x H x L)Technical data rear dashcamImage sensor rear camera: AHD GC2053Resolution rear camera: 1920x1080 pixels (2MP)Frame rate rear camera: 25 FPSImage ratio: 16:9 formatDimensions rear camera: 36 x 37 x 63 mm (W x H x L)Technical data of the systemOperating temperature: -20° C ~ +70° CFlash memory: 8 MbytesPower consumption 610mA (boot time)Power consumption 470mA (Operation)Duration to start recording ~8 sec.Technical data power supply unitAdjustable switch-off voltage 11.6/11.9/12.2/12.5 volts (car) or 23.6/23.9/24.2/24.5 volts (truck)Adjustable switch-off time after: 1h, 2h, 4h, 6h, 12h, 24h and permanentOperating voltage 12 or 24 volts DCMax. Input current 2000mA@12 VDC, 1000mA@24VDCOutput connector MINI-USBOutput voltage 5 Volt, 2ADimensions 60 x 26 x 18mmStorage temperature -20°C to 85°C at 0-90% RHWorking temperature -10°C to 60°CFuse 2A/30VEfficiency 85%Smartphone AppThe following languages are supported by the AMPIRE DC2 app for this dashcam: English, Spanish, German, Chinese, Estonian, Greek, Latvian, Polish, Russian, Slovak, Czech, Ukrainian.PC AppTo view the downloaded videos on a PC, we recommend the free VLC video player. Some Windows video players do not output sound.https://www.vlc.de/Note on the fixed-mounted power supply unitThe fixed-mount power supply unit (article no. ACC2) for the DC2-PRO dashcam enables the so-called parking space mode. When parking mode is activated, the dashcam remains switched on and "guards" your vehicle even when the ignition is switched off. To avoid draining the starter battery, the ACC2 automatically switches off the dashcam at an adjustable voltage or after an adjustable time. The final switch-off takes place 5 minutes after the undervoltage has been reached.Legal noticeWhat is allowed and what is not:https://www.adac.de/verkehr/recht/verkehrsvorschriften-deutschland/dashcam/Important note on installationThe GPS antenna integrated in the dashcam requires free reception to the GPS satellites in order to be able to calculate a position or speed. Windscreens with insulating glass have an infrared-reflecting metallic coating. In such vehicles, position the dashcam in the communication window provided for this purpose in most vehicles, which allows GPS reception. You will find more detailed information on this in the car's operating instructions.

Plug&Play smartphone interface with full integration into the car's multimedia system. Check the compatibility list to see if we have a solution available for your car.The image is displayed on the full factory monitor and the sound is fed in via the audio AUX input of your factory multimedia system. Before ordering, check whether your factory multimedia system also has an audio AUX input or can be retrofitted.Our smartphone interface is compatible with Apple CarPlay® and Android Auto, making it a smarter and safer way to use your smartphone in the car. Everything is operated via the vehicle's own buttons and control systems. Of course, you can also use Siri and OK Google voice control via the included microphone. Everything you want to do with your smartphone while driving can be done directly from the car's display with Apple CarPlay® and Android Auto. You can easily get directions, send and receive messages. While navigating, you can listen to your favourite music via Spotify or your favourite radio station via a radio app - and still concentrate on the road.Simply connect your smartphone to the USB socket in our systemEven more conveniently, you can connect your Apple iPhone wirelessly via WiFi. Wireless Apple CarPlay® is possible from the Apple iPhone 5.FEATURESInterface for retrofitting Apple CarPlay® and for Android AutoOperation via OEM buttons/touchpad from vehicleWireless Apple CarPlay® via supplied WIFI antenna from iPhone 5 onwardsWired Apple CarPlay® via USB (switch off WLAN on iPhone)Wired Android Android via USBAndroid Mirrorlink function (mirroring the smartphone display)USB input for multimedia playback (e.g. USB stick)Video playback with Apple iOS only via USB cableUp to 1080p HD resolution for multimedia playbackSupports RMVB, MOV, MKV, MP4, AVI, RMPairing via Bluetooth only necessary during initial installationIntegrated audio DSP with equaliser for audio outputAnaloger Audio-Ausgang mit 3 Volt Ausgangsspannung für die Tonwiedergabe (Audio AUX)Supports left- and right-hand drive vehiclesSoftware update possible via micro USB input (adapter included)"Apple Siri" and "OK Google" voice control via supplied microphone (no telephony) APPSGPS navigation with Google Maps, Waze and Apple Maps, etc.Music playback with Spotify, Apple Music, Amazon Prime, etc.CAMERA FUNCTIONSInput for front camera (composite video)Rear camera input (composite video)Support for rear cross traffic alert (PDC)Supports moving guidance linesSupports 360° camera systems12 volt output for front camera power supply12 volt output for rear camera power supplyACCESSORIESWe will send you an adapter from MICRO-USB to USB for possible software updates from the interface.VEHICLE COMPATIBILITYBefore purchasing and installing the product, check that it is compatible with your car type, year of manufacture and entertainment system. Your entertainment system must have an audio AUX input for sound playback. Incompatibility may result in damage.Suitable for the following vehicles:Porsche 911 Type 997 with OEM Radio: PCM 3.0, 07/2008 - 12/2012 (with flat cable)Porsche Boxter Type 987 with OEM Radio: PCM 3.0, 02/2010 - 04/2012 (with flat cable)Porsche Cayenne Type 9PA with OEM Radio: PCM 3.0, 02/2009 - 09/2010 (with flat cable)Porsche Cayman Type 987 with OEM Radio: PCM 3.0, 02/2009 - 03/2013 (with flat cable)SMARTPHONE COMPATIBILITYBefore purchasing and installing, check that the product is compatible with your smartphone.Apple iOS: iPhone 5 and higherGoogle Android: Android 5.0 (Lillipop) better Android 6.0 (Marshmallow) and higher.TECHNICAL DATACharging current of the USB port: 1100mAInterface dimensions Interface: 166x89x27mmAPPROVALSE-type of approval number E57*10R06/00*0081E-type of approval number E57*COP*0279IMPORTANT PRODUCT INFORMATIONThe MEDIA IN socket on the body is not an HDMI input for playback from external HDMI sources. This socket is required for add-on modules on some vehicle types. This product is button controlled only and does not support touch screen or gesture control.This retrofit does not serve as a hands-free deviceINSTALLATIONS NOTEThis product is used in vehicles with 12V battery. Please do not install in vehicles with any other voltage. Never extend the HSD signal wires. This product is made of high precision parts and should not be subjected to strong impact. Never open the housing. To protect driving safety and avoid traffic law violations, never operate the product while driving. The optional reversing cameras are only visible when manoeuvring. In addition, always pay attention to your surroundings and never rely on the camera alone. All installation steps should only be carried out by a trained professional. During installation, the ignition must be switched off and the product must not be connected to power until the wiring is complete. NEVER plug or unplug the cables while the power is on to avoid damaging the monitor or the product. Route the cables so that they do not come into contact with metal edges. Doing so may damage the wiring, resulting in fire. Avoid any contact with hot surfaces when wiring the main unit. High temperatures can damage the wiring and cause short circuits, arcing and fires. Please DO NOT install the product in a humid environment to avoid electric shock, damage and fire caused by a short circuit. Upon receipt of the product, please check that all components are in the packaging. If anything is missing, inform the supplier / manufacturer. Start the engine before loading, check the interface if the function is displayed, check the key if the vehicle interface is working correctly. Please give the feedback to the supplier / manufacturer if you have any questions. Please make sure that you handle the disassembled vehicle parts carefully during installation and avoid scratches on the instrument panel. Unused connectors must be insulated to avoid a short circuit. The cable connections should be well plugged in. Avoid interference with control components such as the steering wheel, accelerator and brake pedals.LEGAL NOTICEApple and the Apple logo are trademarks of Apple Inc. registered in the U.S. and other countries. Android is a trademark of Google LLC. The Bluetooth® word mark and logos are registered trademarks and are owned by Bluetooth SIG, Inc. Third party products and brand names may be registered trademarks of their respective owners.

Retrofit set for feeding audio signals into the factory-fitted radio navigation system for:Porsche PCM 3.0Porsche PCM 3.1Porsche PCM 4.0Connection of any external audio source (jack) such as:mp3-PlayerPortabler DVD-PlayerMiniDisk-PlayerNootebookiPhone, iPodOuter dimension AUX socket: 2,7 cm x 2,7 cmCoding dongle includedSelecable Option:For Navigationssystem PCM 3.0For Navigationssystem PCM 3.1For Navigationssystem PCM 4.0Scope of delivery:KUFATEC Cable setOriginal AUX Socket 8J0 035 475KUFATEC Coding dongle