AMPIRE Dual Dashcam DC2-PRO with high-resolution 2K (QUAD-HD) front camera, AHD rear camera and an integrated microphone for front and rear video recording with storage on an optionally available microSD card (32-128 GB). The dashcam is fully operated via a free smartphone app. An integrated GPS sensor enables position determination and speed detection. The 3D G-sensor integrated in the front camera detects accidents and automatically saves events on the microSD card. Via WLAN, you can view the recordings on your smartphone or tablet and export them for further processing. In addition, all settings can be made conveniently via the smartphone app.Visually, the matt black DC2-PRO dashcam is very compact and unobtrusive. An LCD display and unnecessary buttons were deliberately omitted. Installed behind the interior mirror, the front camera is hardly noticeable. The rear camera can be used to monitor the passenger compartment or rear traffic.Features143° wide-angle lens, diagonal (front)2844x1600 pixel 5MP resolution (front)30fps frame rate (front)Integrated GPS receiver for positioningIntegrated 3-axis G-Force sensor (adjustable)Integrated WLANfor control with smartphoneMini-USB 2.0 Hi-Speed interfacesStorage on optional microSD card (Class 10)Voltage stabilisation via super capacitorIntegrated microphone for sound recording (can be switched off)German/English voice messages (can be switched off)Parking mode (can be switched off)Scope of delivery1x front camera with integrated GPS receiver1x AHD rear camera1x ACC2 power supply unit with voltage monitoring and switch-off delay1x 8m connection cable to rear camera1x Operating instructions DEU/ENG1x CE Declaration of Conformity DEU/ENGTechnical data front dashcamViewing angle front camera: D:143°Image sensor front camera: SONY IMX335Resolution front camera: 2844x1600 pixels (5MP)Lens front camera: 6G-1R, F1.9Frame rate front camera: 30 FPSAspect ratio: 16:9 formatFront dimensions: 36 x 41 x 95 mm (W x H x L)Technical data rear dashcamImage sensor rear camera: AHD GC2053Resolution rear camera: 1920x1080 pixels (2MP)Frame rate rear camera: 25 FPSImage ratio: 16:9 formatDimensions rear camera: 36 x 37 x 63 mm (W x H x L)Technical data of the systemOperating temperature: -20° C ~ +70° CFlash memory: 8 MbytesPower consumption 610mA (boot time)Power consumption 470mA (Operation)Duration to start recording ~8 sec.Technical data power supply unitAdjustable switch-off voltage 11.6/11.9/12.2/12.5 volts (car) or 23.6/23.9/24.2/24.5 volts (truck)Adjustable switch-off time after: 1h, 2h, 4h, 6h, 12h, 24h and permanentOperating voltage 12 or 24 volts DCMax. Input current 2000mA@12 VDC, 1000mA@24VDCOutput connector MINI-USBOutput voltage 5 Volt, 2ADimensions 60 x 26 x 18mmStorage temperature -20°C to 85°C at 0-90% RHWorking temperature -10°C to 60°CFuse 2A/30VEfficiency 85%Smartphone AppThe following languages are supported by the AMPIRE DC2 app for this dashcam: English, Spanish, German, Chinese, Estonian, Greek, Latvian, Polish, Russian, Slovak, Czech, Ukrainian.PC AppTo view the downloaded videos on a PC, we recommend the free VLC video player. Some Windows video players do not output sound.https://www.vlc.de/Note on the fixed-mounted power supply unitThe fixed-mount power supply unit (article no. ACC2) for the DC2-PRO dashcam enables the so-called parking space mode. When parking mode is activated, the dashcam remains switched on and "guards" your vehicle even when the ignition is switched off. To avoid draining the starter battery, the ACC2 automatically switches off the dashcam at an adjustable voltage or after an adjustable time. The final switch-off takes place 5 minutes after the undervoltage has been reached.Legal noticeWhat is allowed and what is not:https://www.adac.de/verkehr/recht/verkehrsvorschriften-deutschland/dashcam/Important note on installationThe GPS antenna integrated in the dashcam requires free reception to the GPS satellites in order to be able to calculate a position or speed. Windscreens with insulating glass have an infrared-reflecting metallic coating. In such vehicles, position the dashcam in the communication window provided for this purpose in most vehicles, which allows GPS reception. You will find more detailed information on this in the car's operating instructions.

AMPIRE Dual Dashcam DC2-PRO with high-resolution 2K (QUAD-HD) front camera, AHD rear camera and an integrated microphone for front and rear video recording with storage on an optionally available microSD card (32-128 GB). The dashcam is fully operated via a free smartphone app. An integrated GPS sensor enables position determination and speed detection. The 3D G-sensor integrated in the front camera detects accidents and automatically saves events on the microSD card. Via WLAN, you can view the recordings on your smartphone or tablet and export them for further processing. In addition, all settings can be made conveniently via the smartphone app.Visually, the matt black DC2-PRO dashcam is very compact and unobtrusive. An LCD display and unnecessary buttons were deliberately omitted. Installed behind the interior mirror, the front camera is hardly noticeable. The rear camera can be used to monitor the passenger compartment or rear traffic.Features143° wide-angle lens, diagonal (front)2844x1600 pixel 5MP resolution (front)30fps frame rate (front)Integrated GPS receiver for positioningIntegrated 3-axis G-Force sensor (adjustable)Integrated WLAN for control with smartphoneMini-USB 2.0 Hi-Speed interfacesStorage on optional microSD card (Class 10)Voltage stabilisation via super capacitorIntegrated microphone for sound recording (can be switched off)German/English voice messages (can be switched off)Parking mode (can be switched off)Scope of delivery1x front camera with integrated GPS receiver1x AHD rear camera1x ACC2 power supply unit with voltage monitoring and switch-off delay1x 8m connection cable to rear camera1x Operating instructions DEU/ENG1x CE Declaration of Conformity DEU/ENGTechnical data front dashcamViewing angle front camera: D:143°Image sensor front camera: SONY IMX335Resolution front camera: 2844x1600 pixels (5MP)Lens front camera: 6G-1R, F1.9Frame rate front camera: 30 FPSAspect ratio: 16:9 formatFront dimensions: 36 x 41 x 95 mm (W x H x L)Technical data rear dashcamImage sensor rear camera: AHD GC2053Resolution rear camera: 1920x1080 pixels (2MP)Frame rate rear camera: 25 FPSImage ratio: 16:9 formatDimensions rear camera: 36 x 37 x 63 mm (W x H x L)Technical data of the systemOperating temperature: -20° C ~ +70° CFlash memory: 8 MbytesPower consumption 610mA (boot time)Power consumption 470mA (Operation)Duration to start recording ~8 sec.Technical data power supply unitAdjustable switch-off voltage 11.6/11.9/12.2/12.5 volts (car) or 23.6/23.9/24.2/24.5 volts (truck)Adjustable switch-off time after: 1h, 2h, 4h, 6h, 12h, 24h and permanentOperating voltage 12 or 24 volts DCMax. Input current 2000mA@12 VDC, 1000mA@24VDCOutput connector MINI-USBOutput voltage 5 Volt, 2ADimensions 60 x 26 x 18mmStorage temperature -20°C to 85°C at 0-90% RHWorking temperature -10°C to 60°CFuse 2A/30VEfficiency 85%Smartphone AppThe following languages are supported by the AMPIRE DC2 app for this dashcam: English, Spanish, German, Chinese, Estonian, Greek, Latvian, Polish, Russian, Slovak, Czech, Ukrainian.PC AppTo view the downloaded videos on a PC, we recommend the free VLC video player. Some Windows video players do not output sound.https://www.vlc.de/Note on the fixed-mounted power supply unitThe fixed-mount power supply unit (article no. ACC2) for the DC2-PRO dashcam enables the so-called parking space mode. When parking mode is activated, the dashcam remains switched on and "guards" your vehicle even when the ignition is switched off. To avoid draining the starter battery, the ACC2 automatically switches off the dashcam at an adjustable voltage or after an adjustable time. The final switch-off takes place 5 minutes after the undervoltage has been reached.Legal noticeWhat is allowed and what is not:https://www.adac.de/verkehr/recht/verkehrsvorschriften-deutschland/dashcam/Important note on installationThe GPS antenna integrated in the dashcam requires free reception to the GPS satellites in order to be able to calculate a position or speed. Windscreens with insulating glass have an infrared-reflecting metallic coating. In such vehicles, position the dashcam in the communication window provided for this purpose in most vehicles, which allows GPS reception. You will find more detailed information on this in the car's operating instructions.

Kabelsatz zur Nachrüstung einer originalen Bentley Rückfahrkamera Passend für folgende Bentley Modelle:Continental GT 393 (ab Mj. 2012)Continental GTC 394 (ab Mj. 2012)Continental SupersportsContinental Flying Spur 3W2 (ab Mj. 2012)Flying Spur 4W2Original Bentley Kamera in der Griffleiste der Heckklappe integriertDieser Kabelsatz verbindet die Kamera mit dem Interface sowie das Interface mit der NavigationseinheitWeitwinklige Darstellung des rückwärtigen Bereiches im Bildschirm der NavigationseinheitAutomatische Umschaltung bei Einlegen des RückwärtsgangesEingeblendete Hilfslinen, welche sich entsprechend des Lenkwinkels verändernZusätzlich benötigte Komponenten:Original Kamera + AufnahmeOriginal SteuergerätLieferumfang:KabelsatzHinweis:Nach der Installation ist das Fahrzeug auf Rückfahrkamera zu codieren. Dazu bitte eine Fachwerkstatt kontaktierenBei Fahrzeugen mit originalem TV-Tuner ist die Installation nur vor Ort möglich

Specific KUFATEC module for activating the video source / TV tuner / DVD while drivingFits the following navigation units: (PR no.: 7UG, 8AS, 8AV) Audi MMI navigation plus touch MIB1, MIB2, MIB3 (A3 8V, TT 8S (FV), A4 8W, A5 F5, Q2 GA, Q5 FY, Q7 4M, A6 4G, A7 4G, R8 4S) until and including model year 2017Audi MMI navigation plus touch MIB2, MIB3 (A6 4A, A7 4K, A8 4N, Q3 F3, Q7 4M from model year 2020, Q8 4M, e-tron GE)Audi MMI Navigation plus touch MIB3 (A4 8W, A5 F5, A6 4A, A7 4K, A8 4N, Q3 F3, Q4 F4, Q5 FY, Q7 4M, Q8 4M, e-tron GE, e-tron GT)*VW Discover Pro (Caddy SB, Crafter SY, Golf 7, Golf 8, Touran 5T, Passat B8, CB, Taigo CS, Tiguan AD1, BW2, AX1, BJ2, Arteon 3H, T-Cross C11, T-Roc A11, AC7, Atlas CA1, T6.1 SH, T7 ST)VW MEB (ID3 E11, ID4 E21, ID5 E39, ID-Buzz EB)Skoda Columbus (Octavia 5E, NX, Suberb 3V, Kodiaq NS7, Karoq NU7)Skoda MEB (Enyaq 5A)Seat Leon 5F, Ateca KH, Formentor KM, Taracco KN2Seat MEB (Born K11)Lamborghini Urus ZLBentley New Continental Fits the following radio units: (PR no.: I8D / I8E / I8F  in combination with UF8, U9C) VW Composition Media with MDI interface VW Optionsinfotainment MIB3 (PR-Nr.: 8AR) Activation and deactivation via diagnostic interface of your vehicleOBD version - No interface needs to be installed in the vehicleMirrorlink also while drivingScope of Delivery:KUFATEC 39960 moduleNote:Diagnostic Interface can only be used for one vehicle* MIB3 with SW 2.23, MIB3 is installed on the following vehicles:Audi A1 GB, A6 4A, A7 4K, A8 4N, e-tron GE, e-tron GT, Q3 F3, Q5 FY, Q7 4M, Q8 4M from model year 2021Audi A4 8W, A5 F5 from model year 2020On Audi A3 8Y, Q4 F4, VW Golf 8, ID3 E11, ID4 E21, ID5 E39, ID-Buzz EB, Seat Leon KL, Born K11, Formentor KM, Skoda Octavia NX, Enyaq 5A the respective control unit must be unlocked for a limited time before using the dongle. This must be done by a workshop with valid GEKO accessin the VW Composition Media with MDI interface, only the video source of the MDI is enabledCurrently, retrofitting following vehicles from model year 2024 is not possible:Audi A4 8WAudi A5 F5Audi A6 4AAudi A7 4KAudi A8 4NAudi Q5 FYAudi Q7 4MAudi Q8 4MAudi e-tron GEAudi e-tron GTVW Touareg CRCurrently, retrofitting is not possible for vehicles from 25.11.2023 onwardsAudi Q4 F4