Fully Integrated Sign Assist - FISA for Audi A6 (S6, RS6) 4G, A7 (S7, RS7) 4G, A8 (S8) 4H

• Speed ​​transfer from the camera-based speed limit recognition of the vehicle *)
  
• When the vehicle detects a sign with a speed limit, the speed saved in the LED ring of the speedometer is adjusted based on the configurable profiles.
• Two profiles are available for speed transfer, which can be freely configured.
• The tolerance speed can be set in ± 5 km / h or from 60 km / h in ± 10 km / h steps
• Passover function. E.g. If an incorrect speed limit is detected, the last recognized speed limit can be adopted by briefly pressing the accelerator pedal.

• High beam assistnat activation *2)
• The FLA is automatically activated after a change of ignition

• Configuration is carried out using the “KUFATEC Link” smartphone app
• KUFATEC Link is available free of charge in the Google Play and Apple App Store

• The following functions are available in the "KUFATEC Link"
• Change profiles 1 and 2
• Configure the profiles
• General diagnosis with CAN packet counter
• Pin protection
  
• Incognito mode (the module is completely invisible after the set time)
• Software updates Over The Air
• factory settings
• Visualization of the following information
• Recognized traffic sign
  
• Engine RPM
  
• Accelerator pedal position
  
• Actual vehicle speed
  

Scope of delivery:

• Module
• Cable Plug & Play

Note:

• *) Only for vehicles with PR-Code QR9 and 8T4
• Can only be used on Audi A6/A7/S6/S7/RS6/RS7 4G, A8,S8 4H
• *2) Can only be used on vehicles with high-beam assistant - PR-Code 8N2,8N7,8G1,8G4
• Using the system does not relive the driver of this responsibility to drive the car safely and in accordance with the law. The speed driven and the safety distance must always be checked by yourself. The driver must always be ready to brake. All function described are subject to system limits and require permanent monitoring of the driver.